Continuous Flow Reels
Hose & Nozzle Not Included |
Style FD47
Perfect for fire emergency, plant washdown, or just time-and money- saving convenience.
Indispensable for high-hazard locations, these reels allow hose lines to be brought into action in
seconds. Standard reels suitable for working pressures to 300 lbs.
Hose Connection - FD47-1-100 and FD47-1-200 furnished with 1" male NPT outlet.
FD47-1 1/2-50, FD47-1 1/2-100, and FD47-1 1/2-200 furnished with 1 1/2" male NPT outlet.
Other threads at additional charge.
*Note: When using flat hose (SJ or DJ) with this reel, the flow of water through the reel will be restricted unless all the hose is taken off the reel before use.
Frame- * Heavy bar steel. Designed for mounting on either vertical or horizontal surfaces.
*Rims and Spokes- Rims are tubular steel, and spokes are round steel bolt stock. Surfaces are round and will not cut the hose.
*Swivel Joint- W & K design and manufacture. Easy running and trouble free in operation.
*Drum - 10" diameter to minimize kinking of hose. Heavy gauge sheet steel.
*Finish- Red oxide prime coat.
Listed and approved by Factory Mutual |
Why continuous flow?
- Full stream of water available immediately, even while hose is coiled on reel.
- Water flows through hose constantly--even while unreeling.
- No kinks, no tangling, no delays, because you use only what you need.
- Water supply can be turned on before unreeling hose.
- Easily operated by one person.
|
Freight not included.
| FD47-1-100 |
150' of ¾" or 100' of 1" |
26 |
21 |
19 |
| FD47-1-200 |
300' of ¾" or 200' of 1" |
26 |
31 |
19 |
| FD47-1½ -50 |
75' of 1¼" or 50' of 1½" |
26 |
21 |
19 |
| FD47-1½ -100 |
150' of 1¼" or 100' of 1½" |
26 |
31 |
19 |
| FD47-1½ -100 |
200' of 1 ½" |
31 |
31 |
24 | |
Dry Storage Reel (Style FX)Used primarily for bulk storage of hose, and can also be used to store manila rope, wire rope or cable. All sizes may be used for floor or wall mounting. Standard finish is high gloss red enamel.
| FX299A |
200 |
150 |
100 |
100 |
100 |
50 |
300 |
200 |
100 |
26 |
26 |
19 |
| FX301 |
500 |
350 |
250 |
300 |
200 |
150 |
750 |
500 |
250 |
39 |
26 |
30 |
| FX302 |
650 |
500 |
400 |
400 |
300 |
250 |
900 |
600 |
300 |
39 |
32 |
30 |
| FX303 |
800 |
600 |
500 |
500 |
400 |
300 |
1100 |
700 |
350 |
39 |
38 |
30 |
Pin-Type Hose Rack
30-333 10 - Steel Fire Hose Racks
Underwriters Listed and Factory mutual
approved. Hose is held with movable pins
and UL bar.
2-1/2" x 1-1/2" Reducing Rack for
R&R Synthetic Rack Hose. |
| 30-333 10 |
Pin-type Hose Rack |
| 14-136 40 |
Nipple 1-1/2" MNPT X 1-1/2MNST |
| 18-158 25 |
Angle Valve FNPT X FNPT |
| PR-500 |
Rack Coupled Hose 50', 75', 100' |
| 02-464 31 |
1-1/2 NST Brass Fog Nozzle |
| 02-403 31 |
1-1/2 NST Plastic Fog Nozzle |
| 10-119 10 |
1-1/2'' NST X 1-11/16'' |
| For a complete assembly the following parts are required: Red enameled steel rack , nipple, valve, coupled hose and nozzle. All racks carry UL and FM approval. |
| | |
