FEATURES:

• Precision molded in
  polypropylene. Polypropylene is reinforced with fiberglass for additional strength.
• Self-aligning ball moves freely against the Teflon® seats for smooth operation. The valve opens and closes with very little pressure on the handle.
• Ball is diamond turned after molding to make it spherically perfect, which provides the right contact between ball and seats.
• Viton “O” ring stem seal.
• Teflon® self-lubricating stem bushings and seats cannot stick or rust.
• Stainless steel nuts and bolts are used to insure easy disassembly in corrosive conditions.
• Maximum operating pressure 100 P.S.I. Sizes 1/2” thru 2“ have a four bolt construction. 2“ full port, and 3“ full port have six bolt construction. All have Viton O-Rings and Teflon® seats as a standard.
• Lightweight hose end valve for convenient transfer of liquids. Angle and flange with 8” long polypropylene fill spout. Same features as straight through valve.

FEATURES:
Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength.

• Self-aligning ball moves freely against the Teflon® seats for smooth operation. The valve opens and closes with very little pressure on the handle.
• Ball is diamond turned after molding to make it spherically perfect, which provides the right contact between ball and seats.
• Viton “O” ring stem seal.
• Teflon® self-lubricating stem bushings and seats cannot stick or bind.
• Stainless steel nuts and bolts .
• Maximum operating pressure 100 P.S.I @ 70°F and 75 P.S.I. @ 150 ° F
  

FEATURES:

• 2" full port, 4 bolt design.
• All stainless steel hardware.
• Precision molded in glass filled polypropylene.
• Viton seals.
• 100% Teflon® ball seats.
• Stainless steel nuts and bolts .
• 100 P.S.I maximum @ 70°F and 75 P.S.I. @ 150 ° F

• Glass filled polypropylene.
• Stainless steel handle, spring and pin.
• Viton® rubber parts.
• Resists corrosion.
• Padlock capability
• 75 P.S.I. maximum.
• 40 G.P.M.